Power Sourcing Equipment
The most recent articles and releases classified under Power Sourcing Equipment
ComNet develops industrially hardened dual radio wireless Ethernet link
The new NetWave® NW8 dual radio Ethernet device is a wireless perimeter transmission solution that supports redundant ring and drop and insert wireless network topology
Antaira introduces new generation of PoE Plus 100Tx industrial unmanaged switches
The LNP Series unmanaged switch provides 100Tx Fast Ethernet with IEEE 802.3at (PoE+), fiber optics (SC/ST), and various power input options to support industrial applications.
NVT develops new TBus® IP Transmission product series
TBus is a backbone communications architecture for NVT’s range of IP transmission devices. The long distance Ethernet TBus delivers 56VDC power for remote transceivers as well as their remote Power over Ethernet (PoE) devices such as IP cameras.
Coilcraft PoE Plus magnetics designed for 60 Watt signal path
Developed to meet the IEEE 802.3at-2009 standard for PoE Plus applications, the ETH1-460L Ethernet signal path magnetics module exceeds the return loss requirements of Gbit Ethernet.
Akros Silicon develops industry's first integrated bidirectional 3.4MHz I2C isolator
Optimized to enable real-time telemetry and control of Power Sourcing Equipment (PSE) controllers used in Power-over-Ethernet capable (PoE) switches and routers, the AS1705 digital isolator's 3.4 MHz communication speed and integration level are unmatched in the industry.
Mobilrouter develops cost-effective professional 4-port passive PoE switch with remote monitoring capability
PingBrother EPIW114 Series 4-port industrial 10/100 passive Power over Ethernet (PoE) switch with web based GUI delivers integrated IP watchdog and temperature monitoring
Cisco develops Small Business Gigabit Power over Ethernet Injector
The Cisco Small Business Gigabit Power over Ethernet Injector allows flexible installation of Cisco Small Business Wireless Access Points by providing an alternative to external DC power when deploying a Power over Ethernet (PoE) switch is not an option.
Linear Technology diode bridge controller maximizes power efficiency in PoE driven devices
The LT4321 dual diode bridge controller replaces two diode bridge rectifiers with low-loss N-channel MOSFET bridges to increase the available power and heat dissipation in a Power over Ethernet (PoE) Powered Device (PD). The diode bridge controller meets IEEE 802.3 PoE specifications required for PDs to accept DC supply voltages of any polarity over their Ethernet inputs.